Resending Faxes (Redialing Busy Number)

There are two methods of redialing: Automatic redialing and Manual redialing.

Automatic Redialing

If you send a document and the recipient's line is busy, the printer will redial the number after a specified interval.

Enable and specify the automatic redialing setting on Auto redial in Advanced fax settings under Fax settings.
- Advanced fax settings
Note
- To cancel automatic redialing, delete the unsent fax from the printer's memory while the printer is on-standby for a redial operation. For details, see Deleting Document in Printer's Memory.
Manual Redialing

You can redial to the recipients dialed by entering the fax/telephone numbers.
- Manual Redialing

Important

It may be possible that faxes will reach unintended recipients due to the misdialing or incorrect registration of fax/telephone numbers. When you send important documents, we recommend that you send them after speaking on the telephone.
- Sending Fax after Speaking on Telephone

Note

Automatic redialing is enabled by default.
For details on the basic sending operations:
- Sending Faxes by Entering Fax/Telephone Number

Manual Redialing

Follow the procedure below for manual redialing.

Check that printer is turned on.
Load original on platen or in ADF (Auto Document Feeder).
Select Fax on the HOME screen.
- Using Touch Screen
The Fax standby screen is displayed.
Change send settings as necessary.
- Setting Items for Sending Faxes
Select Redial.

The Redial screen is displayed.
Select a recipient's number to redial.
Press the Black button or the Color button.

Important
- Color transmission is available only when the recipient's fax device supports color faxing.

Note

For manual redialing, the printer memorizes up to 10 recent recipients dialed by entering the fax/telephone numbers. Note that the printer does not memorize any recipients dialed using the redial function or selecting from the directory.
If documents remain in the ADF after the Stop button is pressed while scanning is in progress, Originals in ADF. Remove any originals from the document tray and tap [OK]. is displayed on the touch screen. By selecting OK, the remaining documents are automatically ejected.